15.INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE.

Library FACILITIES :  

a.   Total area of the library                                :  428  Sq .m.

b.   Seating Capacity  of the library                     :  150 students in the main library  + one reading room      

c.   Reprographic facility                                    :  Yes 

d.  Working hours of library                                :  8.30 a.m. to 8.00 p.m.

                                                                         (Monday to Friday)

                                                                         9.30 a.m. to 5.30 p.m.

                                                                           (all Saturdays)

      Issue Counter Timings                                 :  10.00 a.m. to 5.30 p.m. 

e.   Library networking facility                              :  Yes 

      Internet facility to students                           :  Yes 

f.    Usage  data of the Library Books                 :  Students  – 2 books are issued for   

                                                                        the period of 7 days.                         

                                                                      1 book is given for the reference. 

      Teachers                                                    :  10 books for one semester.

      Non-teaching staff                                       :  2 books for one semester. 

      Periodicals                                                  :  Bound volumes of periodicals are issued for 7 days.

                                                                        Loose & current issues of periodicals are given only for reference.

Also IEEE magazines & IEL online access under INDEST AICTE consortium. 

g.   Annual library budget                                   : Rs. 6.5  lakhs per year.

h.   Details of the library staff                             :   

               Mrs. Vrushali Hawaldar                     :  Librarian           -  M.LIB.

               Mr. Vishwas Taralekar                       :  Asst. Librarian  -  M.LIB.      

i.    Details of library facilities                             :

               Books                                          :      Titles                     Volumes

                                                                     5918                      12978

          Magazines -

         Subject                                              :   National                    International

                                                         18                                   48

Laboratory: 

List of major equipments

List of major experiment / facilities

LIST OF EXPERIMENTS IN CHEMISTRY SEM I

1)      TO DETERMINE THE HARDNESS OF GIVEN WATER SAMPLE BY USING E.D.T.A SOLUTION.

2)      TO DETERMINE THE CHLORIDE CONTENT OF GIVEN WATER SAMPLE BY USING SILVER NITRATR SOLN.

3)      TO DETERMINE THE ACID VALUE OF GIVEN OIL SAMPLE BY USING KOH SOLUTION.

4)      TO DETERMINE S.V. OF GIVEN OIL SAMPLE BY USING HCL SOLUTION.

5)      TO DETERMINE THE FLASH PT OF GIVEN OIL SAMPLE BY USING ABLE’S APPARATUS.

CHEMISTRY LABORATORY

DIGITAL WEIGHING MACHINE                              1

ABLES FLASH PT. APPARATUS                             1

REDWOOD VISCOMETER                                    1

PENSKEY MARTIN’S APP                                     1

WIRE GAUZE                                                   2 PKTS

MEASURING CYLINDER 1000ML                           3

BEAKERS 100ML                                               8

BEAKERS 500 ML                                             19

BEAKERS 250ML                                             2 DZ

PINCH CORK FOR BURETTES                           1 PKT

PAIR OF TONGS                                               60

TEST TUBES                                                             12 DZ

TRIPOD STAND                                                        25

TEST TUBE STAND                                                  44

CONICAL FLASK 100 ML                                         30

CONICAL FLASK 250 ML                                         15

PIPETTE 100ML                                                         70

PIPETTE 10 ML                                                          71

CLAMP                                                                       22

STOP WATCH                                                             2

WT BOXES                                                                  4

BURETTE 50 ML                                                        13

BURETTE 25 ML                                                        48

WATER BATH                                                             7

REAGENT BOTTLES                                                200

THERMOMETER                                                        39

CARBA SMALL                                                          52

CARBA BIG                                                                  2

ROUGH BALANCE                                                      1                                            

LIST OF MAJOR APPARATUS 

(ENGINEERING PHYSICS LAB) 

1). ULTRASONIC RANGER AND DETECTOR 

2) OPTICAL FIBER TRANSMITTER AND RECIVER KIT 

3) CATHOD RAY OSCILLOSCOPE.  

4) TRAVELLING MICROSCOPE. 

5) CRYSTAL MODELS. 

6) GM COUNTER 

7) COMPUTERS   (01 Nos) 

8) ULTRASONIC VELOSITY MEASUREMENT KIT 

LIST OF EXPRIMENTS 

1. CRYSTAL STRUCTURE 

2. MILLER INDICES 

3.ULTRASONIC DETECTOR AND RANGER 

4.U.S. VELOSITY DETERMINATION 

5.CRO – VOLTAGE, FREQUENCY AND AMPLITUDE

         MEASUREMENT 

LIST OF MAJOR APPARATUS 

(ENGINEERING MECHANICS LAB) 

1). SIMPLE BEAM APPARATUS. 

2) BELL CRANK LEVER APPARATUS. 

3) POLYGON LAW OF FORCES APPARATUS.  

4) MOMENT OF INERTIA APPARATUS. 

5) FLY WHEEL APPARATUS. 

6) COEFFICIENT OF FRICTION APPARATUS.  

7) COMPUTERS   (02 Nos) 

LIST OF MAJOR APPARATUS 

(ENGINEERING MECHANICS LAB) 

1). SIMPLE BEAM APPARATUS. 

2) BELL CRANK LEVER APPARATUS. 

3) POLYGON LAW OF FORCES APPARATUS.  

4) MOMENT OF INERTIA APPARATUS. 

5) FLY WHEEL APPARATUS. 

6) COEFFICIENT OF FRICTION APPARATUS.   

    LIST OF MAJOR EQUIPMENTS IN  BASIC

    WORK SHOP PRACTICE.

1)      PLANNER MACHINE.

2)      WELDING MACHINE (SINGLE PHASE,200amp)

3)      HACKSAW  MACHINE (7 INCH MANUAL)

4)      3/4 INCH GEARED BENCH DRILLING MACHINE.

5)      CIRCULAR SAW MACHINE 7 INCH

6)      SHEARING MACHINE MANUAL

7)      COMPUTER

    LIST OF JOBS IN BASIC

    WORK SHOP PRACTICE.

1)           CARPENTARY JOINTS

2)           MALE FEMALE FITTING

3)           WOOD TURNING JOB.

4)           SHEET METAL JOB

5)           PIPE FITTING

6)           WELDING JOINTS 

List of experiments Semester I (Physics)

1)      Crystal  Structures.

2)      Millar Indices.

3)      Ultrasonicf Detecter and Ranger.

4)      Cathod ray Oscilloscpe

5)      Diode Characteristics.

6)      Determination of forbidden gap of semiconductor.

7)      Ultrasonic Interferometer.

List of experiments semester  II (Physics)

1)X-ray Diffraction

             2) Newtan’s Ring

             3) Wedge Shaped Film

             4) Difraction of light

             5) Numerical aperture(N.A.)

             6) Optical fiber communication link (OFCL)

List of practical assignments of Computer Programming-I (SEM –I)

1.  WAP to find sum and avg. of three numbers.

2.  WAP to computer the area and circumference of a circle.

3.  WAP using simple if..else statement.

4.  WAP using nested if..else statement.

5.  WAP using switch statement.

6.  WAP using while statement.

7.  WAP using do..while statement.

8.  WAP using for statement.

9.  WAP to read and print elements of 1D and 2D array.

10. WAP to find sum and average of elements of an array.

11. WAP to find maximum and minimum element in an array along with its

      position.

12. WAP to merge two arrays.

13. WAP to sort an array.

14. WAP to print pascal triangle.

15. WAP to perform matrix operations using 2D array.

16. WAP to check whether matrix is symmetric or not using functions.

17. WAP to convert a decimal no. to binary using functions.

18. WAP to find factorial of a no. using recursive function.

19. WAP to print student information using structures.

20. To study UNIX commands.

21. Class assignments.

22. Test Papers.

List of practical assignments of Computer Programming-II (SEM –II)

1.       WAP in C++ to convert temperature form Fahrenheit to Celsius.

2.       WAP in C++ to evaluate following series:

       SUM=1+ (1/2)²  + (1/3)³ +………

3.       To study and implement manipulators.

4.       Program to implement function overloading.

5.       Program to implement class.

6.       Program to study an implement static members and static member functions.

7.       Program to implement array of objects.

8.       Program to implement objects as function arguments.

9.       Program to implement friend functions.

10.   Program to implement Constructors and Destructors.

11.   Program to implement overloading of various operators.

12.   Program to implement various inheritance types.

13.   Program to implement use of constructors in derived class.

14.   Program to sort an array using pointers and study of this pointer.

15.   Program to implement virtual functions.

16.   Program to implement various file operations.

17.   Program to implement different I/O functions.

18.   Class Assignments

19.   Test Paper.

ELECTRONICS & TELECOMMUNICATION ENGINEERING DEPT.

List of major Equipments in EXTC Dept.

List of experiments of Digital Communication Sem – VII (EXTC)

1)   Amplitude shift keying (ASK)modulation /demodulation

2)   Frequency shift keying modulation /demodulation

3)   Phase shift Keying  modulation /demodulation

4)   QPSK  modulation /demodulation

5)   Hamming codes

6)   longitudinal redundancy check code

7)   Cyclic redundancy  check code

8)  Huffman coding

List of experiments of Communication Circuits Sem – V (EXTC)

1)    Impedance Matching  

2)    PLL using 565

3)    Frequency Synthesizer 

4)    Function Generator

5)   Audio Amplifier using LM 380

6)   Wideband amplifier

7)   Balance Modulator  using IC 1596

8)   Balance Modulator by Simulation

9)  Study of  Mixers

COMPUTER DEPARTMENT List of major equipment 

List of Equipments Computer Center.

List of Experimental Set up

INSTRUMENTATION ENGG.  – LIST OF EQUIPMENT

 List of Experiments

Instrumentation Dept.

SEM III

Sub : Electronic Devices and Circuits

1. Clipping nd clamping circuit
2. Transister biasing
3. common emitter amplifier
4. FET Amplifier
5. RC phase shift oscillator
6. cascade amplifier
7. voltage regulator
8. push pull amplifier

Sub: Fundamentals of process & measurement.

1. Study of Triangular notch
2. Study of Festo Trainer Kit
3. Calibration of Orificemeter
4. Calibration of Venturimeter
5. Calibration of Rotameter
6. Study of differential pressure transmitter
7. Study of Heat Exchanger
8. Study of Shell and tube heat exchanger

List of major Equipments.

Dept – Bio Medical

LIST OF EXPERIMENTS

SEMESTER III

HAP

1. Measurement of Blood Pressure
2. Determination of Haemoglobin count in blood.
3. Study of A,B,O Blood group by slide test.
4. To find total count of R.B.C. BY Nebauer Haemocytometer.
5. Study of Defibrillator & Pacemakers.
6. Presentation on Blood Pressure measurement methods.

ENAS

1. Study of time response of first order system.
2. Z & Y parameters of two port network.
3. To verify cascade connection.

ECAD-I

1. Study Clipper & Clamper circuits.
2. Study BJT biasing circuit and different methods of biasing.
3. Design and study common emitter amplifier.
4. Study FWR with different types of filter & finding its ripple factor.
5. Design and analysis of biasing circuits of JFET.

Determination of its DC Operating point.

1. Study FET as an amplifier.
2. Design relaxation oscillator using UJT.
3. Design transistorized series regulator.

SEMESTER IV

LOGIC CIRCUITS

1. To study and verify the function of Logic gaes and to study Nand, NOR as building blocks.
2. Implementation of function in SOP and POS form.
3. Half adder and Full  Adder.
4. Half Subtractor and Full Subtractor.
5. To implement full adder and full subtractor circuit using MUX.
6. To study different flip-flops.
7. To implement 3-bit asynchronous counter.
8. Implementation of MOD-5 Counter.
9. To implement a given logic function.

PCOM

1. Study of Modulator & Demodulator.
2. Study of frequency Modulator & Demodulator
3. Study of Time Division Multiplexing.
4. Study of Superheterodyne Radio Receiver.
5. Study of Pulse Amp.  Modulator & Demodulator
6. Study of Pulse Width Modulator.
7. Study of Pulse Position Modulator.
8. Study of Pulse Code Modulator.

ECAD-II

1. To study frequency response of RC Coupled Amplifier.
2. To study frequency response of CS Amplifier.
3. Adder & Subtractor.
4. Integrator.
5. Differentiator.
6. Differential Amplifier.
7. RC Phase Shift Oscillator.
8. Wein Bridge Oscillator.
9. To study voltage series feedback amplifier.
10. To simulate Class C Power Amplifier.

TBI

1. To design astable multivibrator using 555 Timer.
2. To study the dynamic response of a first order system.
3. To study resistance v/s temperature characteristics of NTC thermistor.
4. Measurement and control of temperature using a thermocouple.
5. To study principle and working of L.V.D.T.
6. To study principle & working of L.V.D.T.
7. To study angular displacement using a capacitive transducer.
8. To study Ph meter.
9. To study characteristics of L.D.R.

SEMESTER V

MI - I

1. To study the X-Ray tube.
2. To study self-rectification of X-Ray tube using X-Ray machine simulator.
3. To study half wave rectification of X-Ray tube using X-Ray machine simulator.
4. To study full wave  rectification  of X-Ray tube using X-Ray machine simulator.
5. To design X-Ray Timer circuit.
6. To study block diagram and technical specifications of X-Ray machine.
7. To study front panel of X-Ray machine.
8. To study the image intensifier tube and CCD Camera.

      BI - I

1. To design and implement regulated power supply of 8V using IC 723.
2. To design and implement a current to voltage converter.
3. To study the principle, construction and internal working circuitry of colorimeter.
4. To study the principle, flat panel & working of spectrophotometer.
5. a) To find the maximum absorption and wavelength of sample solution.

b) Verify Beer Lambert’s law.

1. To estimate amount of blood glucose using a spectrophotometer.
2. To study the principle, panel controls and working of Ph Meter.
3. To study the principle, front panel of pulse oximeter.
4. To determine percentage of Oxygen saturation level in blood and pulse rate using oximeter.
5. To study the principle, panel control and working of flame photometer.
6. To study the principle, panel control and working of audiometer.

     PCS

1. Time response of 1^ST order system.
2. DC Position Control system
3. AC Position Control system.
4. Synchrotransmitter and receiver.
5. Stepper Motor Controller.

SEMESTER  VI

     AIC

1. Study of various parameters of OPAMP.
2. Implementation of astable and multivibrator using OPAMP.
3. Implementation of monostable multivibrator using OPAMP.
4. Study of Zero Crossing Detector using OPAMP.
5. Study of Precison Rectifier- Full Wave and Half Wave.
6. Design and implement Schmitt Trigger.
7. Study of Triangular Wave Generator.
8. To study peak detector using OPAMP.
9. To study monostable and astable multivibrator using IC 555 Timer.
10. To design and implement high voltage regulator circuit.
11. To study response of II Order Butterworth Filter.

MI - II

1. Projections with MATLAB Program.
2. Ray by Ray Technique for Image Reconstruction with Matlab program.
3. Study of Back Projection Technique of Image Reconstruction with Matlab Program.
4. Magnetic Resonance Imaging.
5. Components of CT Scanner

      BI-II

1. Hum Filter
2. Instrumentation Amplifier.
3. Bandpass Filter for Cardiac Monitor.
4. Heart Rate Meter.
5. Alarm Circuit for H.R.M.
6. Voltage Multiplier.
7. Calibration Pulse Generator. For C.M.
8. Pulse Width Modulation.
9. Study of Cardiac Monitor-

Medisystems 7012

Waveform Analysis

  MICROPROCESSOR

1.       Addition of two 16 bit nos.

2.       Multiplication of  two 8 bit nos.

3.       Finding factorial of a no.

4.       Addition of bytes of an array

5.       Finding the largest no. from a given Array

6.       Transfer Array from one location to another

7.       Finding hypotenuse of Triangle

8.       Finding Area of Circle

9.       Finding Resonance frequency

10.   finding roots of Quadratic Equation.  

    BM

1. To study operation of artificial kidney dialysis.
2. To study coplanar Force System.
3. Study of Human Gait Cycle.
4. Fabrication of PTB socket.
5. Fabrication of PSI.
6. Fabrication of Semirigid Cervical Collar.
7. Alignment & Stability of Prosthesis.

Computing Facilities

Special purpose facilities available :

     ACTIVITIES HELD IN THE INSTITUTE :--

 1)  Games & Sports Facilities:-

      Students have a gymkhana & sports equipments as

      Chess

      Carom

      Cricket kit

      Football

      Volleyball

Competitions are held in the above sports every year.

2)  Extra curricular activities:-

      The institute organizes an annual intra college festival called

      “ENSEMBLE” in which various extra curricular activities like

      Dance,  Singing,  Skits, Quiz, Debate, Jams,  Group discussions

      Personality contests,Other technical competitions like robotics, circuit making

      Code programming & debugging.

In addition, seminars, workshops & guest lectures are organized.

3) Soft skill Development Facilities :-  

The college provides adequate presentation facilities (inclusive of LCD’S , OHP,& MICROPHONES  etc). The students make use of these facilities for presentations. Also group discussions, mock interviews etc organized to develop communication & leadership skills.

Other Amenities :-

Auditorium

      Seminar Hall

      Canteen

      Garages

      Girls Common Room

      Boys Common Room

      Gymkhana

      Student Activity Centre

      Number of Tutorial rooms and size of each

        Number of Tutorial rooms and size of each

Number of laboratories and size of each

Central Examination Facility,  Number of rooms and capacity of each :-

Central Examination Facility has been provided in the Institute.

Teaching Learning process :

 1.   Curricula and Syllabi                      :   As per Mumbai University curriculum.

2.  Academic Calendar                        :   As directed by Mumbai University.

3.  Academic Time Table                  :   Time Table is displayed on Notice Board throughout the academic year.   

4.  Teaching Load of each Faculty      :   Strictly as per state Government / Mumbai University Rule.

                                                     Workload of Applied Science Dept

                                                                    ODD SEMISTER 

                                                                     YEAR: 2008-09 

 EXTC Dept. Practical, theory Project

Work load

Load Distribution

INSTRUMENTATION DEPARTMENT